Brand:
COMP Cams
Manufacturer's Part Number:
K12-466-8
Part Type:
Camshaft Kits
Product Line:
COMP Cams Xtreme Fuel Injection Retrofit Cam and Lifter Kits
UPC:
036584116745
Cam Style:
Hydraulic roller, Retro-fit
Basic Operating RPM Range:
1,800-5,800
Camshaft Use:
Street/Strip
Camshaft Manufacturers Description:
Ample low end with very good mi-range. Gear and exhaust upgrade needed. Largest cam for stock converter.
Intake Duration at 050 inch Lift:
218
Exhaust Duration at 050 inch Lift:
224
Duration at 050 inch Lift:
218 int./224 exh.
Advertised Intake Duration:
268
Advertised Exhaust Duration:
276
Advertised Duration:
268 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.570 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.565 in.
Valve Lift with Factory Rocker Arm Ratio:
0.570 int./0.565 exh.
Lobe Separation (degrees):
113
Grind Number:
268XFI HR13
Computer-Controlled Compatible:
Yes
Lifters Included:
Yes
Lifter Style:
Hydraulic roller
Valve Springs Included:
No
Retainers Included:
No
Locks Included:
No
Valve Stem Seals Included:
No
Timing Chain and Gears Included:
No
Assembly Lubricant Included:
Yes
Pushrods Included:
No
Rocker Arms Included:
No
Gaskets Included:
No
Valve Springs Required:
Yes
Quantity:
Sold as a kit.
COMP Cams Xtreme Fuel Injection Retrofit Cam and Lifter Kits
These COMP Cams Xtreme retrofit fuel injection cam and lifter kits are designed to take advantage of the newest developments in camshaft design and to provide maximum performance in late model applications. They are ground on a 113 degree lobe separation using faster-opening and more efficient ramp profiles. COMP Cams Xtreme fuel injection cam and lifter kits include a matched set of COMP Cams High Energy lifters to maximize efficiency. Are you working with fuel injection? Get the most power out of your engine with one of these COMP Cams Xtreme fuel injection cam and lifter kits.
