Brand:
BluePrint Motorsports
Manufacturer's Part Number:
Part Type:
Crate Engines
Product Line:
BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Fully Dressed Long Block Crate Engines
UPC:
00887753800183
Crate Engine Family:
Chevy Big Block
Actual Engine Displacement:
10.3L/632
Crate Engine Cylinder Head Material:
Aluminum
Engine Block Material:
Cast iron
Advertised Compression Ratio:
11.0:1
Assembled:
Yes
Engine Balance:
Internal
Cam Style:
Hydraulic roller, OE roller
Rear Main Seal Style:
1-piece
Intake Manifold Included:
Yes
Intake Manifold Style:
Carbureted
Cylinder Heads Included:
Yes
Carburetor Included:
No
Throttle Body Included:
Yes
Distributor Included:
Yes
Oil Pan Included:
Yes
Valve Covers Included:
Yes
Timing Cover Included:
Yes
Water Pump Included:
Yes
Harmonic Balancer Included:
Yes
Flexplate Included:
No
Flywheel Included:
No
Air Cleaner Included:
No
Spark Plugs Included:
Yes
Spark Plug Wires Included:
Yes
Computer Included:
Yes
Wiring Harness Included:
Yes
Water Pump Style:
Long
Stall Speed Rating RPM Range:
3,800-4,200
Supercharger Included:
No
Remanufactured:
No
Quantity:
Sold individually.
Notes:
Rated at 815 hp with 740 lbs.-ft. of torque. Throttle body is 1,440 cfm EFI system. Recommended stall converter is 3,800-4,200 RPM and recommended fuel is 91 octane. Not for EGR. This engine features 0.300 in. raised exhaust ports and 0.400 in. Deck height increase over factory. Must verify clearance of exhaust, shift linkage, and steering components. Includes black complete front accessory drive system.
Special Attention:
Includes a 1,440 cfm Holley Sniper EFI system.
BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Fully Dressed Long Block Crate Engines
Blueprint Pro Series is for those wanting maximum horsepower and durability.
BluePrint Engines Pro Series Chevy 632 c.i.d. 815 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that's been fully dyno tested, passed vigorous inspections, and is ready to power up your project.
Blueprint's Pro Series 632 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and complete front accessory drive system with a polished or black finish (your choice).
Additional features:
* Tall deck with 4-bolt main (approximately .400 taller/wider than OEM block)
* Forged H-beam connecting rods
* Cylinder head specs:
-- 119cc chamber
-- 2.30 in. intake / 1.88 in. exhaust valves
-- 358cc intake / 125cc exhaust runners
* Camshaft specs:
-- .698 intake / .698 exhaust
-- 272 intake / 282 exhaust duration
-- at .050 - 110-degree lobe separation
* Installed accessory drive with A/C, P/S, alternator, water pump, belts, and pulleys
* Dyno test results shipped with engine
