BluePrint Builder Series LS427/605HP Standard Edition EFI Crate Engine and TKX Transmission Combos
BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 605 horsepower, this standard edition builder series includes a TKX manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 11.1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos.
Other product features, items, and specifications:
* BluePrint Engines High Strength Cast Iron (LSX Style) Block
* Increased deck thickness and strength webbing
* Utilizes OEM LS3 front and rear covers
* Improved water jacket design
* Extended cylinder skirt
* One-piece rear main seal
* Priority main oiling
* 4.0665 in. bore
* 6-bolt main
Rotating Assembly:
* Forged crankshaft
* Stroke – 4.125 in.
* Forged 6.125 in. connecting rods
* Forged pistons
* Internally balanced (front and rear)
Cylinder Heads:
* BluePrint cast aluminum PS8015 models
* Chamber – 70cc
* Valves are 2.165 in. intake and 1.600 in. exhaust
* Exhaust runners are 259cc intake and 102cc exhaust
Camshaft Specs:
* Hydraulic roller
* Intake valve lift – 0.624 in.
* Exhaust valve lift – 0.624 in.
* Intake duration at 0.050 in. of lift – 239
* Exhaust duration at 0.050 in. of lift – 255
* Lobe separation angle (LSA) – 114 degrees
Ignition Timing:
* ECM supplied calibration
Assembled TKX Transmission Package:
* McLeod Super Street Pro dual-disc clutch
* Hydraulic throw-out bearing
* Bell housing
* Billet flywheel
* Engine guard
* Starter
* Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth)
Other Components:
* MLL-BLS4273KBTKX and MLL-BLS4273KTKX engine/trans combo packages include: Front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor
* Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System
* LS Swap oil pan, windage tray, pickup screen
* BluePrint Engines fuel injectors and rail
* DBW throttle body
* Throttle pedal, and sensors
* GM plastic intake manifold
* Spark plugs and wires
* Harmonic balancer
* Coil packs
Important Notes: Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning. Engine/Trans Package Ships assembled.
Applications
